contact_support
Did you find any incorrect product information?
Tell us so we can fix it. Thanks!Login for Price
Plug-in 12VDC Replacement motor for ZDSP, ZDBP, RDP, RTP, RRP, OZD, BPZD dampers
Replaces MP12 motor actuator
*The MP12M is now featured with a minimum position setting.
Login for Price
- Brand: ZonefirstVoltage Rating: 12 VDCType: Plug-In
- The MP12M is the plug-in motor actuator on all of the EZ Wire Plug-In Damper Systems. The MP12M is a powerful, low current draw, 12 Volt DC power open, power closed motor actuator. Each zone of our control panels are capable of powering up to ten (10) MP12Ms. The MP12M wires with standard modular RJ11 jacks and 4 conductor telephone cable, making wiring literally a snap. This motor also features a single, two-color LED to indicatethe motor actuator position. GREEN indicates the damper is OPEN and RED indicates the damper is CLOSED. The LED is not illuminated during cycling. The motor cycles between open and closed in less than 5 seconds. The MP12M motor has been life tested to over 1,000,000 cycles to provide long life. If necessary, even replacing the motor is a simple less than 1 minute change. Simply loosen the setscrew holding the motor to the damper and slide the motor off the damper shaft. Then place a new one on and secure with the setscrew.
- Replaces MP12 motor actuator|MP12M is now featured with a minimum position setting|Note: damper minimum position adjustment does not indicate damper position
- Zonefirst Replacement Motor, Plug-In, 12 VDC, 0.1 A, For Use With: ZDSP, ZDBP, RDP, RTP, RRP, OZD and BPZD Dampers, Domestic