Auer Steel | Taco Lwco Probe Type 24v Primary

Auer Steel

Taco

Part #LTA0243S-2

Taco Lwco Probe Type 24v Primary

: Brand: Taco
Voltage Rating: 24 VDC
Reset Type: Automatic
Series: LT Series
Pressure Rating: 250 psi
Temperature Rating: 32 to 150 deg F
Power Rating: 2.8 VA
Connection Type: NPT
Thread Size: 3/4 in
: The Low Water Cutoff (LTA-2) is a microprocessor based low water cutoff for detecting the presence to water in a boiler. The LTA-2 uses advanced signal processing to identify when the probe signal levels have decreased due to possible fouling. These advanced technologies permit extended operation for probe impedance up to 40K Ohms. The LTA-2 functions longer without requiring probe cleaning, and it functions normally under non-ideal installation conditions. The LTA-2 is designed for use with hot water boilers and hot water heating boilers. (See each boiler manufacturers' specifications for recommended minimum safe water levels.) During a low water condition, the "Status" LED will illuminate RED. Under normal conditions, it will illuminate GREEN. See "Status LED States" table for details.
: Probe sensitivity - 20 kOhm, extended operation to 40 kOhm|50 VA pilot rating|32 to 150 deg F ambient temperature|Enclosure rating - NEMA 1 for indoor use only|Automatic reset when water level returns to safe level|Integrated test switch for testing safety shutdown
: Taco Low Water Cut-Off, Series: LT Series, 24 VDC, 32 to 150 deg F, 250 psi, Automatic Reset, NPT, 3/4 in, 2.8 VA