For applications requiring higher flow and head pressures, Bell & Gossett provides an entire range of booster pumps. The designs of these pumps are based on 3-part configuration which offers complete field repairability and compact construction. All Bell & Gossett boosters are equipped with the incomparable Bell & Gossett manufactured motor for quiet and efficient operation.
Oil lubricated circulator|Cast iron body|115 V with built-in overload protection|Sleeve bearing, oil lubricated with replaceable resilient motor mounts|Noise dampening coupler|Bell & Gossetts own flexible spring design adds to quiet operation, do not accept a substitute|Long bronze sleeve bearings maintain exact shaft alignment|Provides for constant circulation of oil over bearing surfaces|Precision ground pump shaft is oversized to provide large bearing surfaces|Hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life|The Bell & Gossett standard mechanical seal is designed to withstand the wide range of water temperatures, pressures, additives and dissolved solids common in hydronic systems|Centrifugal impeller prevents accumulation of air at seal faces to assure long life|Close impeller/body tolerances minimize water slippage and maximize efficiency|2 in NPT flange|Steel, Zinc Plated or Lead-Free Brass impeller|Drip proof motors|Recommended for indoor use only|Model 2 NFI
Bell & Gossett Booster Pump, 3-Piece, 1/6 hp, 115 VAC, 1.9 A, 60 Hz, 1 ph, 125 psi Maximum, 1725 rpm Motor, Centrifugal Impeller, 225 deg F, Sleeve Bearing, 16-5/8 in L x 8-1/2 in H