Designed for residential, commercial or industrial use with water, oil or gas. This approved Webstone valve is specifically designed for power purging individual loops in a hydronic heating system and ensures the critical distance between tees is within tolerance for hydronic separation. Actuated by a blow-out proof stem and features an adjustable packing gland. Solder joint temperature ratings are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or overheat valves when soldering.
Replaces 5 components, eliminates 4 leak paths, saves 36 min of labor-however, correct spacing for hydraulic separation cannot be achieved using off-the-shelf components|Provides precise spacing required for hydraulic separation|Enables power purging of secondary loops, improving efficiency at system startup|Full port solid flow channel ensures highest possible flow rate|The only way to place a valve between closely spaced tees|Pro-Pal Primary/Secondary Loop Purge Tee|Full port forged brass ball valve|Patented technology|PTFE stem seal
Webstone Purge Tee Ball Valve, Series: Pro-Pal 5865, 1-1/4 in Nominal, C Primary Loop x C Secondary Loop, 600 psi WOG, 100 deg F, Full Port, Media: Gas/Oil/Water, Reversible Handle Actuator, HCP Brass Ball, 6-5/16 in Inlet to Outlet Length, 2-1/4 in Top to Inlet Center, Brass Body, Brass Stem and PTFE Seat Trim, PTFE, Brass