contact_support
Did you find any incorrect product information?
Tell us so we can fix it. Thanks!Copper Monoflo Tee 108120
- Brand: Bell & GossettLength: 2-9/16 in
- Bell & Gossett Monoflo Fittings make possible the use of a single pipe to act as both a supply and return main. These Fittings connect the risers to the main and assure proper diversion of water into each heating unit, whether radiator, convector or baseboard, and regardless of its position in the system. Except for the 3/4 in fitting, they can be installed at either the return or supply riser or both depending on the pressure drop through the side branch circuit and terminal unit, with the other riser connection being a common tee. Red Ring Monoflo fittings can be used for most installations where cast iron or non-ferrous baseboards, free standing radiation, or convectors are installed.
- Copper Red Ring Monoflo fittings let you use a single pipe to serve as both supply and return main|Connect risers to the main, assuring proper division of water to each heating unit regardless of type and its position in the system|Recommended for most installations including cast iron non-ferrous baseboards, free-standing radiation or convectors|Only one fitting is needed for most installations for adequate diversion for upfeed radiation|For most applications, a second fitting can be used if higher resistance is required
- Bell & Gossett Red Ring Monoflo Tee Fitting, 1 x 1/2 in Nominal, Solder, 2-9/16 in Length, 150 psig, 300 deg F, Copper