Auer Steel
Part #DRE80 18KW 208V
Login for Price
Part #DRE80 18KW 208V
Aos 208volt (6) Comm Elec Htr W/t&p
Login for Price
- Brand: AO SmithVoltage Rating: 240 VACAmperage Rating: 43.3 A Full LoadPhase: 3 phSeries: Custom Xi™ DSE-80Dimensions: 52-1/4 in L x 28 in WPressure Rating: 125 psiType: Heavy DutyMaterial: SteelTemperature Rating: 90 to 190 deg FPower Rating: 18000 WFinish: Baked EnamelHeating Capacity: 61434 Btu/hrTank Capacity: 80 galASME Yes/No: YesHeating Element: (1) Incoloy®Recovery Rate: 246 gph at 30 deg F RiseWater Connection: 1-1/4 in NPT
- AO Smith's new propriety electronic water heater control, provides precise +/- 1 deg F temperature control, that is ideal for industrial and food service applications where exact temperatures of hot water are needed|Operating set point is adjustable from 90 to 190 deg F factory setting is 120 deg F|Animated icons display detailed operational and diagnostic information, fault or alert messages appear if an operational issue occurs|Element sensing each element is constantly monitored and current On/Off state is displayed, any element failure is reported and its exact location is shown, eliminates a need for field testing of elements|Low water cut-off factory standard on board low water cut-off uses a remote electronic immersion type probe to prevent energizing of the elements in the event of low water condition and eliminates accidental dry firing|Sequencing units with multiple element contactors are sequenced on with one-second delay between stages, prevents high amp electrical loads from hitting the electric system all at once and provides a smoother operating unit|Night setback operation control system automatically lowers the operating set point by a user defined value during setback periods, seven-day clock may be programmed for night set back and or weekend shutdown to reduce operating cost and save energy|Powered anode DSE models use a unique combination of a conventional magnesium anode and a European style power anode|Powered anode is self-adjusting to water conditions, does not require maintenance unless damaged and provides longer-lasting tank protection in hard to reach areas|Multi-anode system provides superior anodic protection to hidden surfaces of the tank not protected in convention commercial electric water heaters|Incoloy immersion heaters heavy duty medium watt density elements provide excellent protection against oxidation and scaling|Heavy foam insulated|Glass lined tank AO Smith's Permaglas coating provides truly superior protection against corrosion and is permanently bonded to all inner tank surfaces at 1600 deg F|Magnetic contactors heavy duty UL rated for 100000 cycles|Terminal block to accept copper or aluminum leads (on units with more than one contactor)|120 VAC control circuit powered by fused transformer|Simplified circuitry, color coded for ease of service|Brass drain valve|Hinged control compartment door
- AO Smith Electric Water Heater, Heavy Duty, Series: Custom Xi DSE-80, 61434 Btu/hr Heating, 80 gal Tank, 240 VAC, 43.3 A Full Load, 18000 W, 3 ph, 1-1/4 in NPT Water Connection, (1) Incoloy Heating Element, 246 gph at 30 deg F Rise Recovery, 125 psi, 90 to 190 deg F, ASME Yes/No: Yes, Steel, Baked Enamel, 52-1/4 in L x 28 in W