Auer Steel
Air Products and Controls
Part #SL2000P
Login for Price
Part #SL2000P
Smoke Detector Photo Electric
Login for Price
- Brand: Air Products and Controls
- Air Products and Controls Duct Smoke Detector, LED Alert, 85+/-5% Humidity Rating, Photoelectric Sensor, Solid/Stranded Wiring Type, 32 to 140 deg F Operating, Plastic Backbox, Gray, 13-1/2 in L x 4-1/2 in W x 2-1/2 in H.
- Low-flow technology: photoelectric models listed for velocities between 100 to 4000 ft/minInterconnect up to 30 units for common functionsPatented no-tools required front or rear loading and removing sampling/exhaust tubesPatented test port valve allows for aerosol smoke testing without cover removalClear cover fitted with four captive no-tools required thumbscrewsOperating voltages: 230VAC, 115VAC, 24VAC and 24VDCStaggered terminal blocks for easier wiringFlashing LED on detector head indicates normal operationMore wiring space than competitive modelsFootprint allows easy retrofit in many applications without additional drillingDuct wall gaskets on back of enclosure are pre-installedCompatible with the WP-2000 weatherproof enclosureReset switch is also an alarm test switch competitive models require a magnet or cover removal to test at unitUnit includes green pilot and red alarm visual indicatorsExternal mounting tabs do not require cover removal to installColored cover gasket indicates proper cover sealCompact, lightweight size means easy handling, lower shipping costsTwo sets of 10A form C alarm contacts, One set of 2A form A alarm contacts, One set of 10A form C trouble contactLarge terminal connection screwsStandard interchangeable plug-in UL268 photoelectric or ionization heads
- Low-flow technology: photoelectric models listed for velocities between 100 to 4000 ft/min
- Interconnect up to 30 units for common functions
- Patented no-tools required front or rear loading and removing sampling/exhaust tubes
- Patented test port valve allows for aerosol smoke testing without cover removal
- Clear cover fitted with four captive no-tools required thumbscrews
- Operating voltages: 230VAC, 115VAC, 24VAC and 24VDC
- Staggered terminal blocks for easier wiring
- Flashing LED on detector head indicates normal operation
- More wiring space than competitive models
- Footprint allows easy retrofit in many applications without additional drilling
- Duct wall gaskets on back of enclosure are pre-installed
- Compatible with the WP-2000 weatherproof enclosure
- Reset switch is also an alarm test switch competitive models require a magnet or cover removal to test at unit
- Unit includes green pilot and red alarm visual indicators
- External mounting tabs do not require cover removal to install
- Colored cover gasket indicates proper cover seal
- Compact, lightweight size means easy handling, lower shipping costs
- Two sets of 10A form C alarm contacts, One set of 2A form A alarm contacts, One set of 10A form C trouble contact
- Large terminal connection screws
- Standard interchangeable plug-in UL268 photoelectric or ionization heads