Auer Steel
Part #325-7AL 1-1/2
Line Reg 2# Max Inlt 7-11in Outlt
Login for Price
- Brand: Maxitrol
- Maxitrol® Line Regulator, Lever Acting Design, Series: 325, 1-1/2 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 8 in Inlet to Outlet Length, Aluminum Body, 7.3 in H.
- Suitable for multi-positional mounting, If ball check vent limiting device is installed, mount in an upright position onlyNote: capacities are used to determine the maximum multiple appliance load, the largest single appliance served by the regulator should not exceed the maximum individual load specified aboveMinimum Regulation: Suitable for pilot flow applications65 psi emergency exposure limit (inlet side only)1/2 in NPT vent connection6.1 in swing radiusMaximum Individual Load: 1250000 Btu/hrTotal load of multiple appliance combined capacity: 1250000 Btu/hr7 to 11 in wc, 1.7 to 2.7 kPa at 2 psi (white CSA certified springs)
- Suitable for multi-positional mounting, If ball check vent limiting device is installed, mount in an upright position only
- Note: capacities are used to determine the maximum multiple appliance load, the largest single appliance served by the regulator should not exceed the maximum individual load specified above
- Minimum Regulation: Suitable for pilot flow applications
- 65 psi emergency exposure limit (inlet side only)
- 1/2 in NPT vent connection
- 6.1 in swing radius
- Maximum Individual Load: 1250000 Btu/hr
- Total load of multiple appliance combined capacity: 1250000 Btu/hr
- 7 to 11 in wc, 1.7 to 2.7 kPa at 2 psi (white CSA certified springs)