Auer Steel
Part #325-5L 1
LineReg2#MaxInlt7-11inOutltW/lkLmt
Login for Price
- Brand: MaxitrolNominal Size: 1 inSeries: 325Dimensions: 5.3 in HBody Material: AluminumPressure Rating: 2 psiInlet to Outlet Length: 5.9 inType: Lever Acting DesignTemperature Rating: -40 to 205 deg FEnd Style: Thread
- Maxitrol's 325-L Series line pressure regulators are for 2 psi piping systems. 325 Series regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise regulating control from full flow down to pilot flow. 325 Series regulators are for 2 psi and 5 psi piping systems. Models available for appliance main burner or pilot applications and as line pressure regulators.
- Suitable for multi-positional mounting, If ball check vent limiting device is installed, mount in an upright position only|Note: capacities are used to determine the maximum multiple appliance load, the largest single appliance served by the regulator should not exceed the maximum individual load specified above|Minimum Regulation: Suitable for pilot flow applications|65 psi emergency exposure limit (inlet side only)|3/8 in NPT vent connection|4.9 in swing radius|Maximum Individual Load: 425000 Btu/hr|Total load of multiple appliance combined capacity: 600000 Btu/hr|1 to 2 psi inlet pressure|7 to 11 in wc, 1.7 to 2.7 kPa at 2 psi (white CSA certified springs)
- Maxitrol Line Regulator, Lever Acting Design, Series: 325, 1 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 5.9 in Inlet to Outlet Length, Aluminum Body, 5.3 in H