Auer Steel
Part #R8184M1051
Login for Price
Part #R8184M1051
Oil Burner Control 45 Sec W/xfmer
Login for Price
- Brand: HoneywellVoltage Rating: 120/240 VACAmperage Rating: 3.7 to 7.4 AMounting Type: Junction BoxDimensions: 4-3/8 in H x 4 1/8 in W x 2 1/2 in DDomestic/Import: DomesticTemperature Rating: -40 to 130 deg FIgnition Type: Intermittent
- The TRADELINE intermittent ignition oil primary control operates the oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat from the thermostat. Through a C554 Cad Cell Flame Sensor, the R8184 monitors the burner flame and shuts down the system on ignition failure or on flame failure during the run cycle. A light emitting diode (LED) on the terminal strip lights when the safety switch opens to provide safety shutdown indication. A manual reset button is provided to reset the safety switch after lockout. For convenience in system maintenance, the safety switch can be manually opened using a lever on the front of the control. Clock thermostats that power the clock through the primary control transformer will lose time during lockout unless backup batteries are installed.
- Operates the oil burner and oil valves (if desired) in response to a call for heat from a low voltage control circuit|
- Intermittent ignition is on while the burner is on|
- Solid state flame sensing circuit|
- External button to manually reset safety switch after lockout|
- Enclosed safety switch must be manually reset after safety shutdown|
- R8184M includes 4 VA transformer and Y and G terminals for connection of cooling equipment|
- Mounts on standard 4 x 4 in junction box|
- C554A cadmium sulfide flame detector and 24 VAC thermostat required|
- 22.2 to 44.4 A at 12 to 24 VAC for locked rotor
- Honeywell Protectorelay Oil Burner Control, 120/240 VAC, 3.7 to 7.4 A, Intermittent Ignition, -40 to 130 deg F, Junction Box Mount, 4-3/8 in H x 4 1/8 in W x 2 1/2 in D, Domestic