21007450

Kidde® 21007450 Intelligent Battery Operated Combination Smoke and Carbon Monoxide Alarm, 70 to 400 ppm Detection, (2) AA Battery, 85 dB at 10 ft, Specifications Met: UL Listed

  • Brand Name: Kidde®
  • ASPN: 21007450

The Kidde 900-0216A uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. In addition, the Intelligent Alarm contains a voice warning that clearly states the present danger - smoke or carbon monoxide - and announces "FIRE!" or "WARNING! CARBON MONOXIDE!" The Intelligent Alarm combines the detection capabilities of an ionization smoke sensor - which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires - with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm's overall performance in all fires, and significantly reduces the potential for a nuisance alarm. This alarm uses ionization sensing technology. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.

Kidde® Combination Smoke and Carbon Monoxide Alarm, Intelligent Battery Operated, (2) AA Battery Power Source, 70 to 400 ppm Detection, Alarm: Audio, 85 dB at 10 ft Alert, Green/Red LED Visual Alert, 10 to 95% Humidity, Ionization Smoke/Electrochemical Sensor, 0.97%/ft Sensitivity, Specifications Met: UL Listed, 40 to 100 deg F Operating, 5.6 in Dia x 1.8 in D Dimensions

  • pdf
    Data/Spec Sheet-1
    https://www.auersteel.com//ASSETS/DOCUMENTS/ITEMS/EN/UnitedTechnologies_21007450_Data_Sheet.pdf
  • Voice alarm - announces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected
  • Alarm announces "Fire Fire" when a smoke or fire hazard is detected and announces "Warning Carbon Monoxide" when a CO hazard is detected
  • Combined carbon monoxide and smoke alarm - a single unit can be installed where previously, two were needed
  • Reduces installation time and helps to keep home decor attractive
  • Test/reset button - tests alarm circuitry and triggers the voice announcement
  • LEDs - flashing green for normal operation and flashing red for alarm condition
  • Low battery warning - the unit warns of a low battery condition by announcing "low battery" and by initiating an alarm chirp and activating a flashing red LED
  • Battery powered - provides protection even during power outages when many fire and carbon monoxide incidents occur
  • Battery safeguard - the battery door will not close unless the batteries are properly installed
  • Hush® feature - temporarily silences nuisance alarms
  • Alarm warnings - fire: the red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message "Fire", the alarm pattern will repeat until smoke is eliminated
  • Carbon monoxide: four short alarm beeps followed by a verbal warning "WARNING! CARBON MONOXIDE!" this continues until the unit is reset or the CO is eliminated
  • Low battery: if any form of battery failure is detected the red LED light will flash and the unit will "chirp" once every 60 seconds for at least 7 days
  • The "LOW BATTERY" voice occurs once every 15 minutes, the green LED will also be flashing twice per second
  • Voice hush indication: "HUSH MODE ACTIVATED" and "HUSH MODE CANCELLED" voice announcement
  • Peak level memory: if the alarm had detected a CO level of 100 ppm or higher, the unit will announce "CARBON MONOXIDE PREVIOUSLY DETECTED" to warn of the CO incident, when the test/reset button is pressed
  • Clam pack configuration

Availability by Location

Location Availability

    Write Review

    Atleast 50 Characters. You can Express Upto 1000 Characters

    Copyright © Auer Steel. All Rights Reserved. Sitemap Privacy Policy

    LoginSign Up

    Forgot your Password?

    Change Password

    You have login first time with temporary password, you need to reset you password!
    • User Name : web
    Please Note: All fields are required unless noted.
    loading

    An Email Id is required to process your orders. Please enter your email id and click update.